background image

Statement

Welcome to use the product from Xi’an NovaStar Tech Co., Ltd. (hereinafter 
referred to as “Novastar”). It is our great pleasure to offer this manual to help 
you understand and use the product. We have striven for precision and reliability 
during the compilation of this manual, and the contents of this manual are subject 
to change at any time without further notice. If you have any problem during 
use or you have any suggestion, please feel free to contact us according to the 
contact information provided in this manual. We will do our utmost to satisfy your 
needs. We would like to express our sincere appreciation to your suggestions and 
make assessment for adoption as soon as possible.

Copyright

All the intellectual property rights involved in this document belong to NovaStar. 
No part of this document may be reproduced or extracted in any form or by any 
means without prior written consent of NovaStar. All rights are reserved.

Trademark

 is the registered trademark of NovaStar.

Safety Statement

To avoid potential hazards, please use this controller according to regulations. 
Power outlet should be installed near the controller and easy to reach. In the 
event of breakdowns, non-professionals are not allowed to disassemble the 
controller for maintenance. Please contact the after-sales department of NovaStar 
timely.

High voltage danger: The operating voltage range of this product is 
100-240V AC.
Grounding: This product is grounded through the grounding cord of  
power supply. Please keep the grounding conductor well grounded.
Electromagnetic interference: Keep this product far away from 
magnets, motors and transformers.
Moisture proof: Keep this product in a dry and clean environment. In

case of liquid immersion, please pull the power plug out immediately. 

Keep this product away from flammable and explosive substances.

Prevent liquids or metal fragments from dropping into the product in 
order to avoid safety accidents.                                                                    

XI'AN 

NOVASTAR 

TECH 

CO.,LTD.

Summary of Contents for MCTRL 4K



















Reviews: