Novametrix Medical Systems OXYPLETH 520A, Service Manual

Page: 82 / 133

Section 15
Connecting to other Equipment
72
Model 520A Service Manual 5693-90-01
PRELIMINARY
4. When the recorder is properly adjusted, press the
RUN
key. The monitor will
return to Monitoring Mode and automatically begin outputting analog data to
the Analog Output Module.
Note: This setup procedure does not have to be performed each time the
monitor is turned on—the monitor will always automatically output analog
information via the Analog Output Module, this procedure simply helps to
calibrate the recorder to the Model 520A signals.