Novametrix Medical Systems OXYPLETH 520A, Service Manual

Page: 59 / 133

5-Jun-01 Model 520A Service Manual
49
PRELIMINARY
PROBE FAULTY RD
Sensor faulty. Remove sensor from use and contact qualified
service personnel.
☞
Sensor Red LED has failed or the cable connections are
open or shorted.
PROBE FAULTY IR
Sensor faulty. Remove sensor from use and contact qualified
service personnel.
☞
Sensor Red LED has failed or the cable connections are
open or shorted.
PROBE OFF PATIENT
Sensor disconnected from patient, improperly applied, or
placed on an area too translucent for proper sensor operation.
Reposition sensor.
PULSE-HIGH
Selected pulse rate high alert limit has been violated.
PULSE-LOW
Selected pulse rate low alert limit has been violated.
PULSE OUT OF RANGE
Pulse rate is less than 30 bpm or is greater than 250 bpm.
Revision 2.0
APR/28/92
Monitor software revision level. Displayed when monitor is
turned on while pressing
AUDIO key.
SpO2-HIGH
Selected saturation high alert limit has been violated.
SpO2-LOW
Selected saturation low alert limit has been violated.
Message Center Display Possible Explanation