36247 Canadian I/B version 12229C-1
15 12229C-1
OWNER
＿
＿
S MANUAL#
36247
VER.12229C-1
PAGE:
15
English version
POWER INSTALLATION
BASE UNIT POWER CONNECTION
CAUTION:
You must use a Class II
,
120 VAC
Input
/
9VDC Output
adapter that delivers at
least 300 milliampere. The plug should correctly fit the base unit's adapter jack.
1. Plug the adapter into a standard AC outlet.
2. Insert the small plug into the adapter jack on the rear of shown in the base as in
Figure 8.
(Figure 8)
HANDSET BATTERY INSTALLATION
CAUTION:
Use only the Nickel Cadmium (Ni-Cd) battery type included with this
unit. Use of other battery types may cause injuries or damage.
1.
Remove the battery compartment cover of the handset.
2.
Connect the rechargeable Ni-Cd battery as shown on Figure 9.
(Figure 9)
3.
Insert the Ni-Cd battery into the battery compartment of the handset.
4. Slide the battery compartment cover firmly in its closed position.
INITIAL SETUP
Before you can use your cordless telephone, the handset must be charged for at
least 20 hours. See charging instruction in the MAXIMIZING BATTERY LIFE section
9VDC
Adapter
Jack
Line
Cord
Telephone
Modular Jack
AC Wall Outlet
9VDC Adapter
DC Plug
Inset the End
of the Battery
Pack Wire
BLACK WIRE
Handset
Battery
Compartment
RED WIRE
