manualshive.com logo in svg

Northwestern Bell Phones Excursion 36247, Owner'S Manual

Share
Download
Northwestern Bell Phones Excursion 36247 Owner'S Manual Download Page 5

36240 Canadian I/B version 12229C-1

　

 12229C-1                                                                                                                                                   4

　

　
　

     OWNER

＿

＿

S MANUAL#

36240 

VER. 12229C-1 

PAGE:   

4

         English version 

　

　

　

　

　

　

　

　

There may be a remote risk of electric shock from lightning. 

14.   Do not use the telephone to report a gas leak in the vicinity of the leak. 

　
　

　

 SAVE THESE

 

INSTRUCTIONS

　

　

　

　

BATTERY SAFETY INSTRUCTION

　

　

　

CAUTION : 

To reduce the risk of fire or injury to persons, read and follow these 

instructions: 
1.    Use only the following type and size of handset battery pack: 

　

Cordless Telephone Battery Pack 

 

DC3.6V, 850mAh, Ni-Cd Battery Pack 

 

Manufacturer: Max Power Electronics Ltd. 

         Model No.: 10312F0 

2.   Do not dispose of the battery in a fire. The cell may explode. Check with local 

codes for possible special disposal instructions. 

3.   Do not open or mutilate the battery. Released electrolyte is corrosive and may 

cause damage to the eyes or skin. It may be toxic if swallowed. 

4.   Exercise care in handling the battery in order not to short the battery with 

conducting material such as rings, bracelets and keys. The battery or conductor 
may overheat and cause burns. 

5.     Recharge only the battery provided with or identified for use with this product. 

The battery may leak corrosive electrolyte or explode if it is not the correct type. 

6.   Do not attempt to rejuvenate the battery provided with or identified for use with 

this product by heating them. Sudden release of the battery electrolyte may 
occur causing burns or irritation to eyes or skin. 

7.   When inserting the batteries into this product, the proper polarity or direction 

must be observed. Reverse insertion of batteries can cause charging that may 
result in leakage or explosion. 

8.   Remove the batteries from this product if the product will not be used for a long 

period of time (several months or more) since during this time the battery could 
leak in the product. 

9.   Discard “dead” batteries as soon as possible since “dead” batteries are more 

likely to leak in a product. 

10.   Do not store this product, or the battery provided with or identified for use with 

this product, in high-temperature areas. Batteries that are stored in a freezer or 
refrigerator for the purpose of extending shelf life should be stabilized at room 
temperature prior to use after cold storage.

　

　

11.   Disconnect telephone lines before installing batteries.

　

　 　

　

　

　

SAVE THESE INSTRUCTIONS

　

　

　

INSTALLATION PRECAUTIONS

　

　

　

　

Summary of Contents for Excursion 36247





































Reviews:

No comments

Brands by name

Popular brands

Load more brands