36240 Canadian I/B version 12229C-1
12229C-1 14
OWNER
＿
＿
S MANUAL#
36240
VER. 12229C-1
PAGE:
14
English version
Drill two holes with a vertical distance between the two
marked positions of 3
15/16”
(100 mm) as shown in Figure 5.
1.
Drive a screw into each of the holes. Tighten them to the
end of the screw line, only leaving the smooth part of the
screw head outside the wall.
2.
Hang the unit onto the screws, then slide it down firmly to
fasten the base securely. (Figure 5)
BELT CLIP INSTRUCTION
•
Clamp the belt clip at the back of the handset as shown in Figure 6.
(Figure 6)
CONNECTING THE HEADSET
For hands free conversation, a headset (not included) is connected to the headset
jack as shown in Figure 7. The handset receiver and microphone are disabled when
the headset is connected.
(Figure 7)
Press the TALK button to answer or place a call using the headset. Refer to the
manufacturer's headset manual for more details.
Headset Jack
Headset Plug
(2.5mm)
