manualshive.com logo in svg

Northwestern Bell Phones Excursion 36247, Owner'S Manual

Share
Download
Northwestern Bell Phones Excursion 36247 Owner'S Manual Download Page 28

36247 Canadian I/B version 12229C-1

　

 27                                                                                                                                            12229C-1 

　

OWNER

＿

＿

S MANUAL#

36247 

VER.12229C-1 

PAGE:   

27

         English version 

　

　

　

　

　

　

　

　

2.   Press 6 button, or press (-) button two times. The current time is displayed. 
3.   Enter 2 digits hour. The position to edit is blinking.  
       Use         button to delete error entry. 
4.   Enter 2 digits minute. 
5.   Press 1 for AM and 2 for PM. 
6.   Enter 2 digits month. 
7.   Enter 2 digits day. 
8.   Press SCAN / PRG button to save and exit. 

　

　

H.  HOW TO ADJUST THE CONTRAST OF LCD DISPLAY 

1.   In standby mode, press SCAN / PRG button. 
2.   Press 7 button, or press (-) button once. The current 

contrast is displayed. 

3.   Press         or        button to change the contrast.  

The contrast scrolls as 01       02      03 (Three steps). 

4.   Press SCAN / PRG button to save and exit. 

　

　

NEW CALL / MESSAGE INDICATOR 

• 

On the base unit, NEW CALL LED indicator will flash every 1second when new 
call comes in. NEW CALL LED indicator will flash every 2 second when voice 
mail message comes in. 

• 

On the handset, NEW CALL LED indicator will flash every 2 seconds.  

 

　

　

　

　

TALKING TIME AND CHANNEL DISPLAY 

In talk mode, the LCD Display shows the talking time. The 
LCD Display  as shown means 1 hour and 12 minutes and 10 
seconds. The using channel is 32.  
  

CALL WAITING ID OPERATION 

Call Waiting ID lets you know who is on call waiting while you are still using the 
telephone. Before, only a tone alerts you if you have a call waiting. Now, the 
Excursion

®  

36247 can also show the Caller Identification on Call Waiting (CIDCW) 

information using the LCD Display.  

NOTE: 

During conversation and the Call Waiting signal comes in, you will hear the 

data signal. Before you use these features on your Excursion

® 

36247 telephone, you 

must first subscribe to the services through your local telephone company.  
When the Call Waiting signal is heard on the receiver, the LCD Display will show the 
name and number just like regular Caller ID. If you wish to speak to this person 
press the FLASH button. 
The Call Waiting ID Records are stored, reviewed, redialed and edited the same as 
regular Caller ID Records. Please refer to the CALLER ID OPERATION section for 
more details.   

　
　
　
　
　
　

　

　

        02 
CONTRAST

　

　

1:12       10          32  

　

　

TALK

　

　

Summary of Contents for Excursion 36247





































Reviews:

No comments

Brands by name

Popular brands

Load more brands