36240 Canadian I/B version 12229C-1
12229C-1 18
OWNER
＿
＿
S MANUAL#
36240
VER. 12229C-1
PAGE:
18
English version
In most overlay area codes, 10 digits dialing is required in both the User's (Home)
and Neighboring area codes.
NOTE:
If you need to dial calls to your User's (Home)
area code and that call requires 11 digits due to that call
being a toll call (as required in some areas), then the 1
+ Area Code can be added back to the 7 digits number. Please refer to CALLBACK
OPTION 2 on page 25.
3 Area Code Setup
Your User's (Home) area code can be programmed as 7 or 10 digits Callback. If you
have 2 new area codes that require 10 digits dialing because of a 3 way area code
split or overlay, then use this procedure to set your Excursion
®
36247 Area Code
setup.
If your situation was due to an area code split, then 7 digits dialing is usually
required for local calls from your User's (Home) area code and calls placed into the
new Neighboring area codes may require 10 digits dialing.
If your situation was due to an area code overlay, then 10 digits dialing is likely
required into your User's (Home) area code. In either case, dialing into the new
Neighboring area codes created by the split or overlay may require 10 digits dialing
into those new area codes. Please refer to the PROGRAMMING MODE section to
set 3 area code on page 26.
NOTE:
If your User's (Home) area code requires 10 digits dialing for the Callback
feature, set Callback Number. Please refer to the PROGRAMMING MODE section
to set CALLBACK NUMBER on page 26. The default setting for the Callback
Number of digits is 7. In many split area codes, 7 digits dialing is required in the
User's (Home) area code and 10 digits dialing is required in the Neighboring area
code.
All other area codes not affected by the split will dial as 11 digits (1 + Area Code +
Local 7 digits number).
All area codes that are received by the Excursion
®
36247 that are not programmed
into the Area Code setup will automatically dial out 11 digits.
In most overlay area codes, 10 digits dialing is required in both the User's (Home)
and Neighboring area codes.
NOTE:
If you need to dial calls to your User's (Home) area code and that call
requires 11 digits due to that call being a toll call (as required in some areas), then
the 1 + Area Code can be added back to the 7 digits number. Please refer to
CALLBACK OPTION 2 on page 25.
TELEPHONE OPERATION
TO PLACE A CALL IN TALK MODE
