DVRN960 User
’s Manual
31
3.6.6.3
Motion Detect
This item allows users to enable / disable the motion detection function of the
DVR. Select <On> to enable Motion Detect alarm events, or <Off> to disable.
If motion detection function is enabled, it is required to define motion
detection parameters, such as detection area and sensitivity settings in
<Detection Config>.
3.6.6.4
Detection Configuration
If motion detection function is enabled, the motion detection parameters
should be setup. Select a channel in <Channel Select>, and then click
<Detection Config>. The Detection Configuration menu displays as follows.
Detection Config
Detected Area Setup
Sensitivity
Area Threshold
88%
4
Detected Area Setup
The Detected Area is displayed as follows. The detection area consists of
192 (16×12) detection grids.
Click and drag the mouse to select or de-select a detection area. A pull-down
list will be displayed after the mouse is released. Select <Block Select> to set
the grid(s) as a motion detection area, or select <Cancel> to abort. After the
setting is completed, right click and select <Confirm> to save the setting.
Sensitivity
This item is used to set the sensitivity of detection grids. A greater value
indicates more sensitive motion detection. A motion alarm will be triggered
once the amount of motion detected exceeds the Threshold value.
Adjust the value by clicking UP / DOWN buttons next to <Sensitivity>. The
value is increased by 4% increment.
Summary of Contents for DVRN960 Series
Page 2: ...DVRN960 User s Manual 1 ...