![Northern Micro Spirit Q370-AS User Manual Download Page 97](http://html1.mh-extra.com/html/northern-micro/spirit-q370-as/spirit-q370-as_user-manual_1708594097.webp)
devices are connected well.
Can't
up via the power pin, please contact your Service Center.
▪
When power is on, the power LED on the motherboard is still off: If convenient, please
test the power supply in another PC which is working fine.
▪
The power cable is faulty, please change the power cable to check if this might be the
problem.
▪
The PC works very slowly
Solution
▪
Hangs during
, try to determine which device is always being searched when
the PC hangs:
▪
Take off the unnecessary device to see if that speeds up the PC.
▪
Change the
one by one
▪
Hangs at the Windows Login
▪
Enter safe mode to see if the issue is still evident
▪
Re-install the drivers
▪
▪
After entering the OS, it takes a long time to see the desktop
▪
Click“ Start”—“ Run”, input “ msconfig”, enter” System Configuration Utility”—“
Startup”, cancel the unnecessary
up items
▪
Check if caused by any incompatible
▪
Please optimize the system
▪
Only runs slowly when using some special
▪
Check if the system configuration fulfils the minimum requirement of the
▪
End the process which takes up the most CPU usage
▪
Please optimize the system
▪
Only runs slowly when connect to the
▪
Change the
cable to see if the speed changes
▪
▪
Please optimize the system
▪
An abnormally high temperature causes the slow speed
▪
Check the fan settings in the
▪
Improve the heat transfer conditions
▪
Please optimize the system
▪
Summary of Contents for Spirit Q370-AS
