Northern Micro Spirit Q370-AS, User Manual

Page: 79 / 123

Allows you to select the PrinterPort mode. Configuration options: [STD Printer Mode][SPP
Mode] [EPP-1.9 and SPP Mode][EPP-1.7 and SPP Mode][ECP Mode][ECP and EPP 1.9
Mode][ECP and EPP 1.7 Mode]
Serial Port Console Redirection
Console Redirection [Disabled]
Enables or disables the console redirection feature. When enabled, it allows you to
maintain a system from a remote location by redirecting keyboard input and text output
through the serial port. Configuration options: [On][Off]
Console Redirection Settings
The following items become configurable only when you set the previous item to [On].
Terminal Type [VT-UTF8]
VT-UTF8 is the preferred terminal type for out-of-band management. The next best choice is VT100+
and then VT100. Configuration options: [VT100] [VT100+] [VT-UTF8] [ANSI]
Bits per second [115200]
Allows you to select the transmission speed of the serial port. Configuration options: [9600] [19200]
[57600] [115200]
Flow Control [None]
Flow control prevents data loss from buffer overflow. This item allows you to set the flow control.
Configuration options: [None] [ Hardware RTS/CTS] [ Software Xon/Xoff]
APM Configuration
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was before
the AC power loss.
Power On By PCIE/PCI [Disabled]
[Disabled] Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel®/Realtek LAN device.
[Enabled] Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the Intel®/Realtek
LAN device.
Power On By Ring [Disabled]
[Disabled] Disables Ring to generate a wake event.
[Enabled] Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second will
become user-configurable with set values.
Network Stack Configuration
Network Stack [Disabled]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disabled] [Enabled]
The following two items appears only when you set the previous
item to [Enabled].
▪