INTRODUCTION
May 25, 2022
Page 10
User Manual No: OM-10
4
A EN
SECTION 3
–
INTRODUCTION
3.01
KLASIK Torch Description
These air-cooled or water-cooled Spool / Push-Pull MIG/MAG
Manual Welding Torches are designed for hand Metal Inert Gas
welding (MIG) and Metal Active Gas welding (MAG) welding us-
ing MIG/MAG welding Power Source.
The Torches consist of a variety design elements:
1. CNC machined tips and gas diffusers are 100% compat-
ible with OEM MIG Torches.
2. Ergonomic, solid handle design.
3. Positive grip Trigger Button with long life contacts.
4. Heavy Duty insulated metal jacketed swan neck with high
conductivity inner copper tube.
5. Cable supported by steel spring to reduce hand fatigue.
These elements create a very reliable and long-lasting Torch
system with minimal maintenance.
The JINAN NORTH WELDING TOOLS ordering numbers, avail-
able accessories, spare parts, and wear parts are found within
this User Manual.
3.02
KLASIK Spool Torches Duty Cycle
The MIG/MAG Manual Welding Spool Torches rated duty cycles
is a statement of the time it may be operated at its rated welding
amperage without exceeding the temperature limits of the com-
ponent parts.
Spool Torches QLBF-200 III / QLBF-185 / QTLB-24D-SP /
QTLB-36D-SP @ 60%
60% Duty Cycle at Rated Weld Current - Mixed or CO
2
Gas
6 Minutes Welding
in any 10 Minute Period
4 Minutes Non-Welding
in any 10 Minute Period
Push-Pull Torches QTLB-24D / QTLB-36D @ 60%
60% Duty Cycle at Rated Weld Current - Mixed or CO
2
Gas
6 Minutes Welding
in any 10 Minute Period
4 Minutes Non-Welding
in any 10 Minute Period
3.03
KLASIK Push-Pull Torches Duty Cycle
The MIG/MAG Manual Welding Push-Pull Torches rated duty cycles
is a statement of the time it may be operated at its rated welding
amperage without exceeding the temperature limits of the compo-
nent parts.
Push-Pull Torches QTLB-24D / QTLB-36D @ 60%
60% Duty Cycle at Rated Weld Current - Mixed or CO2 Gas
6 Minutes Welding
in any 10 Minute Period
4 Minutes Non-Welding
in any 10 Minute Period
Push-Pull Torches PG4000 / PG4045
@ 40%
40% Duty Cycle at Rated Weld Current - Mixed or CO
2
Gas
4 Minutes Welding
in any 10 Minute Period
6 Minutes Non-Welding
in any 10 Minute Period
Push-Pull Torches PW5000 / PW5045 @ 100%
100% Duty Cycle at Rated Weld Current - Mixed or CO
2
Gas
10 Minutes Welding
in any 10 Minute Period
0 Minutes Non-Welding
in any 10 Minute Period
3.04
KLASIK Torch Contents
All KLASIK Torches come complete with:
•
MIG/MAG Manual Welding Torch
•
Contact Tip
•
Nozzle
•
User Manual No: OM-10
4
A EN
NOTE 1:
JINAN NORTH WELDING TOOLS reserves the right to change, improve or revise the specifications or design of this product
without prior notice. Such updates or changes do not entitle the buyer of this Product previously sold or shipped to the corresponding
changes, updates, improvements, or replacement. The values specified in the table above are nominal parameters. An individual Torch
may differ from the above specifications due to in part, but not exclusively, to any one or more of the following variations
or changes in manufactured
components, installation location/conditions.
