Nortel NN46120-104 User Manual Download Page 167

Page: 167 / 300

netdirect_packet

167

netdirect

The

netdirect

tag logs information pertaining to the Net Direct client

connection, e.g. that a connection has been requested and that it has
been accepted or rejected.

netdirect_packet

The

netdirect_packet

tag logs information about packets being sent

and received when the user has initiated a connection to a host.

Because of the large amount of information, we recommend logging to
a TFTP/FTP/SFTP server.

Nortel VPN Gateway

User Guide

NN46120-104

02.01

Standard

14 April 2008

Summary of Contents for NN46120-104
































































































































































































































































































Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands

Nortel NN46120-104, User Manual

Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands