Nortel NN46120-104 User Manual Download Page 165

Page: 165 / 300

165

ipsec

The

ipsec

tag logs any AAA-related output concerning the establishment

of an IPsec tunnel.

ippool

The

ippool

tag logs messages related to the allocation of IP addresses

from the IP pool (applies to Net Direct and IPsec).

ssl

The

ssl

tag logs information related to the SSL handshake procedure,

e.g. used cipher.

The

tag logs information related to a TunnelGuard check, e.g. access

method, user name, user source IP, TunnelGuard session status and SRS
rule check result.

Nortel VPN Gateway

User Guide

NN46120-104

02.01

Standard

14 April 2008

Summary of Contents for NN46120-104
































































































































































































































































































Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands

Nortel NN46120-104, User Manual

Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands