200
Syslog Messages
Failed to send troubleshooting log to CLI. Disabling CLI troubleshooting
log.
•
Can’t bind to local address: <ip>:<port>: <reason>
Problem encountered when trying to set up virtual server on
<ip>:<port>.
•
Ignoring DNS packet was not from any of the defined
namesserver <ip>:<port>
NVG received reply for non-configured DNS server.
•
Proxy connect host name too long: <host>
The host name is too long to perform proxy connect. Make the host
name shorter or remove the domain from the proxy connect mapping.
•
Certificate CRL handling errors:
—
failed to start auto-crl handling
—
<Cert#>: syntax error when parsing the CRL-URL
—
<Cert#>: automatic retrieval of HTTP-CRL failed - lookup failure
<Host>
—
<Cert#>: automatic retrieval of HTTP-CRL failed - parse error
—
<Cert#>: auto-crl over HTTP failed, reason: <Reason>
—
<Cert#>: automatic retrieval of HTTP-CRL failed
—
<Cert#>: failed to create TFTP-CRL temp file
—
<Cert#>: parsing of TPFP-CRL URL failed
—
<Cert#>: automatic retrieval of TFTP-CRL failed - lookup failure
<Host>
—
<Cert#>: failed to read TFTP-CRL temp file
—
<Cert#>: automatic retrieval of TFTP-CRL failed
—
<Cert#>: automatic retrieval of LDAP-CRL failed - lookup failure
<Host>
—
<Cert#>: failed to contact LDAP server at <Host>
—
<Cert#>: no CRL (1) found at LDAP server
—
<Cert#>: CRL authentication failed
—
<Cert#>: no CRL (2) found at LDAP server
—
<Cert#>: no CRL (3) found at LDAP server
—
<Cert#>: no CRL passwd found
—
<Cert#>: no CRL filter was found
—
<Cert#>: no CRL interval found for cert
—
<Cert#>: CRL revocation failed - <Reason>
Nortel VPN Gateway
User Guide
NN46120-104
02.01
Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.
Summary of Contents for NN46120-104
Page 299: ......
