Nortel NN46120-104 User Manual Download Page 103

Page: 103 / 300

Using TFTP/FTP/SCP/SFTP to add Certificates and Keys

103

Apply your changes.

>> Certificate 1#

apply

Changes applied successfully.

Your certificate and private key is now fully installed and ready to
be taken into use.

If the NVG software is used for SSL acceleration purposes, the
certificate should be mapped to the virtual SSL server, using the

/cfg/ssl/server #/ssl/cert

command.

If the NVG software is used for deployment of a VPN solution,
the certificate should be mapped to the portal server of the
desired VPN, using the

/cfg/vpn #/server/ssl /cert

command.

To view basic information about configured certificates, use the

/cfg/cur cert

command.

--End--

Using TFTP/FTP/SCP/SFTP to add Certificates and Keys

The following is an example of how to input a certificate into the VPN
Gateway using TFTP, FTP, SCP, or SFTP.

Nortel VPN Gateway

User Guide

NN46120-104

02.01

Standard

14 April 2008

Summary of Contents for NN46120-104
































































































































































































































































































Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands

Nortel NN46120-104, User Manual

Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands