Nortel NN46120-104 User Manual Download Page 24

Page: 24 / 300

Introducing the VPN Gateway

Supported Key and Certificate Formats

•

PEM

•

DER

•

NET

•

PKCS12

•

PKCS8

•

KEY(MS IIS4.0)

Supported Handshake Protocols

•

SSL versions 2.0, 3.0

•

TLS version 1.0

Hash Algorithms

•

Message Digest 5 (MD5)

•

SHA1

Cipher Suites

All ciphers covered by SSL version 2.0, 3.0 and TLS version 1.0, except
the IDEA and FORTEZZA ciphers. Also see

“Supported Ciphers” (page

177)

Management

•

Web User Interface (HTTP or HTTPS).

•

Command Line Interface (CLI) access through Telnet/SSH or serial
port.

•

SNMP version 1, version 2c and version 3.

•

RADIUS authentication of CLI/BBI administrator users (including
console access).

Statistics

•

Statistics can be viewed per access method (SSL or IPsec) for the
whole cluster as well as for specific VPN Gateways, SSL servers and
VPNs.

•

Support for histograms, for example, to measure transactions per
second (TPS) and throughput.

Nortel VPN Gateway

User Guide

NN46120-104

02.01

Standard

14 April 2008

Summary of Contents for NN46120-104
































































































































































































































































































Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands

Nortel NN46120-104, User Manual

Search results

Summary of Contents for NN46120-104

Reviews:

Related manuals for NN46120-104

Brands by name

Popular brands