manualshive.com logo in svg

Nortel ICS 4.0, Manual

Share
Download
Nortel ICS 4.0 Manual Download Page 38

26 / Frequently used programming operations

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

Making Changes to Do Not Disturb on Busy

When you are on a call and a second call comes in, your 
telephone rings softly to alert you to the second call. You can turn 
this feature on or off for each telephone.

 Begin the programming session 

Press 

≠

.

Press 

CHANGE

 and enter the internal number where 

you want the calls to be sent. In this example, it’s 221.

You can press 

CLR

  to change the destination back to 

None

.

Press 

®

 to end your session.

You can press 

‘

 to continue programming capabilities for this 

telephone, or press 

–

 three times to return to the Terminals and Sets 

heading.

Tip - 

If the Norstar set is a member of a Hunt Group, the 

Call Forward on busy feature is overridden and the Hunt 
Group call continues to ring until the hunt time has 
expired. For more information on Hunt Groups see 
“Programming Hunt Groups” on page 135.

Press 

ƒ

.

Press 

••¤flfl‹››

.

Fwd on busy. . .

Fwd to:None

CHANGE

Fwd to:221
CLR

CHANGE

End of session

Jan 1    12:00pm

Feature:

p0881591.book  Page 26  Wednesday, August 19, 1998  6:43 PM

Summary of Contents for ICS 4.0



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands