manualshive.com logo in svg

Nortel ICS 4.0, Manual

Share
Download
Nortel ICS 4.0 Manual Download Page 28

16 / Frequently used programming operations

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

Note:  CLASS Trunks are required for this feature to work. 

Consult your customer service representative to 
determine if you have CLASS Trunks.

This feature also allows the automatic changing between North 
American daylight savings and standard time. Your system uses 
the time and date information from the first incoming call after 
two rings to update to daylight savings or standard time.

The Automatic Time and Date feature automatically overrides 
any manually programmed changes to the time and date in your 
system.

Note:  The year is not included with the time and date 

information and must be programmed manually if the 
current year differs from the network time.

Programming Automatic Time and Date

You can program the Automatic Time and Date feature to enable 
your system to automatically update the time and date after a 
power failure, and to automatically change between daylight 
savings and standard time.

Press 

ƒ

.

Press 

••¤flfl‹››

.

Press 

‡¤‡fi°‡

.

The passwords can be changed. See “Using passwords” on page 171 for more 
information.

Jan 1     12:00pm

Feature:

Password:

RETRY

p0881591.book  Page 16  Wednesday, August 19, 1998  6:43 PM

Summary of Contents for ICS 4.0



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands