manualshive.com logo in svg

Nortel ICS 4.0, Manual

Share
Download
Nortel ICS 4.0 Manual Download Page 214

202 / Troubleshooting

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

You should hear page tone through the telephone speaker at 
the maximum volume. The volume returns to its previous 
setting when you end the test. 

Pressing any button ends the test.

Testing the power supply to a telephone

1. Press 

ƒ°‚fi, then £ or 

NEXT

 until the 

display reads 

Power test

.

2. Press 

TEST 

or 

˙ to go ahead with a power supply 

test.

You should see all the indicators on the telephone go on and 
hear ringing at maximum volume. When the test has ended, the 
display should briefly show 

Power OK

.

The test lasts for five seconds or until you press a button.

p0881591.book  Page 202  Wednesday, August 19, 1998  6:43 PM

Summary of Contents for ICS 4.0



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands