manualshive.com logo in svg

Nortel ICS 4.0, Manual

Share
Download
Nortel ICS 4.0 Manual Download Page 211

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

Troubleshooting

Using the alarm telephone

An alarm telephone displays Norstar’s system alarm codes, 
should they occur. It is a Norstar telephone with a two-line 
display (M7310 or M7324 telephones) that the installer or 
customer service representative has assigned as an alarm 
telephone.

Reporting and recording alarm codes

If an alarm message appears on the alarm telephone’s display:

1. Record the alarm number.

2. Press

 TIME 

and record the time displayed.

3. Call your installer or customer service representative and 

report the alarm code.

4. After speaking to your installer or customer service 

representative, press

 CLEAR

.

Displays

Testing the telephone

If you suspect something is wrong with a button, the speaker, 
the displays, or some other part of the Norstar telephone 
hardware, you can do a quick test to see which part of the 
telephone is broken.

Report this alarm and the time it occurred to 
your installer or customer service 
representative.

Alarm:

61-4-2

TIME

CLEAR

p0881591.book  Page 199  Wednesday, August 19, 1998  6:43 PM

Summary of Contents for ICS 4.0



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands