manualshive.com logo in svg

Nortel ICS 4.0, Manual

Share
Download
Nortel ICS 4.0 Manual Download Page 178

166 / Using System features

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

Turning Services on and off

The master control for how different services and their 
schedules are used by your system is in programming. There 
are three settings: Manual, Automatic and Off.

•

Manual allows you to turn the service on and off at any 
time from a control telephone using a feature code.

•

Automatic allows you to use the preassigned stop and start 
time for a service. You are able to start and stop the service 
by entering the appropriate feature code at a control 
telephone. If you select this setting, you use the start and 
stop times programmed by your installer or customer 
service representative. 

•

Off prevents the service from being activated.

You need the programming template found at the front of this 
guide. See “Getting started with Norstar”  on page 1 for more 
information.

1. Press 

ƒ••¤flfl‹››.

2. Press 

¤‹fl›fl (the default System Coordinator 

password).

3. Press 

‘ twice.

4. Press 

≠ at 

Services

.

5. Press 

‘ until you see the Service you want to 

program.

6. Press 

≠ and ‘ until you see the 

schedule you want to program.

7. Press 

≠ and use

 CHANGE

 to select the setting that 

works best for your office: 

Off

, 

Manual

 or 

Automatic

.

Each schedule can have its own configuration of a Service 
which works independently of automatic start and stop times. 

p0881591.book  Page 166  Wednesday, August 19, 1998  6:43 PM

Summary of Contents for ICS 4.0



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands