manualshive.com logo in svg

Nortel ICS 4.0, Manual

Share
Download
Nortel ICS 4.0 Manual Download Page 121

Tracking your incoming calls / 109

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

•

record only selected calls that you choose, as opposed to 
using Call Log automatically

•

quickly record caller information before a caller hangs up

Press 

ƒ°⁄‹ to log an external call manually.

Deleting old log items

ƒ°⁄fi

Your log has a set number of items that it can hold. When it 
becomes full, new calls cannot be logged. When your log is 
full, Autobumping automatically deletes the oldest Call Log 
item when a new call is logged.

Press 

ƒ°⁄fi to enable autobumping. 

Press 

ƒ£°⁄fi to disable autobumping.

Viewing your Call Log

ƒ°⁄¤

To view your log:

1. Press 

ƒ°⁄¤. The display shows the number 

or previously read items (old) and the number of new, 
unread items (new) in the log.

2. Press 

•

 

or

 OLD

 to view old items; press 

£

 

or

 NEW

 to 

view new items. 

3. Press 

‚ or

 RESUME

 to display the last item you viewed, 

the last time you viewed your Call Log.

Names and numbers for external callers are displayed only if 
you have subscribed to Call Display services from your local 
telephone company.

p0881591.book  Page 109  Wednesday, August 19, 1998  6:43 PM

Summary of Contents for ICS 4.0



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands