7
CallPilot Message Networking Set Up and Operation Guide
Chapter 1
About CallPilot Message Networking
This guide leads a System Administrator through setting up Message Networking and is an
ongoing reference aid. Use this guide if you have a Business Communications Manager or
CallPilot 100/150 system.
Requirements for setting up Message Networking
To use Message Networking you need to know:
•
how to use the telephones on your system. If you use Nortel Networks Business Series
Terminals refer to the
CallPilot Reference Guide,
the C
allPilot Manager Set Up and
Operation Guide
or the
CallPilot Quick Reference Cards
.
•
if you use Business Communications Manager, which mailbox interface you use.
See the
CallPilot Reference Guide
for information on how to check which interface you use.
•
how to start CallPilot Manager and use the CallPilot Manager interface.
For information see “Starting CallPilot Manager” and “About the CallPilot Manager
interface” in Chapter 2 of the C
allPilot Manager Set Up and Operation Guide
•
if you use Business Communications Manager, how to start Unified Manager and use the
Unified Manager interface.
Refer to the
Business Communications Manager Programming Operations Guide.
•
specific addressing information about CallPilot and other voice messaging sites on your
network. We recommend that you work with the Network Administrator when you set up
Message Networking.
About Message Networking
Message Networking links your voicemail system with voicemail systems at different locations.
Message Networking uses Digital Networking and Audio Message Interchange Specification
(AMIS) to let subscribers exchange messages with subscribers at other locations.
You must apply the Message Networking Software Authorization Code before your system can
receive or send network messages. Contact your vendor to purchase or trial a software
authorization code for Message Networking.
