Chapter 3 Setting up AMIS
35
CallPilot Message Networking Set Up and Operation Guide
Building a Dialing
Translation Table
To build a Dialing Translation Table, you must enter an Input value and an Output value for each
entry. The Input value is the number that the system looks up in the Dialing Translation Table. If
the corresponding entry matches, the system substitutes the Output value for the Input value. The
resulting number is ready to dial on the local network. Refer to
“Examples of Dialing Translation
for examples of Dialing Translation Tables.
To build a Dialing Translation Table
1
Start CallPilot Manager.
2
Click the
Configuration
heading.
3
Click the
Dialing Translation Table
link.
The Dialing Translation Table page appears.
4
Click the
Add
button.
The Dialing Translation Setup page appears.
5
In the
Input Value
box type the input value.
6
In the
Output Value
box type the output value.
7
Click the
Submit
button.
