Chapter 2 Setting up Digital Networking
19
CallPilot Message Networking Set Up and Operation Guide
Configuring CallPilot 100/150 to use domain names or IP addresses
If you do not have a DNS you can configure your CallPilot host to recognize the domain names of
other CallPilot sites on your system. For example, a bank can create domain names for each branch
that has a CallPilot site on their system, with the names “Downtown”, “South Side” and “West
End”, so that an employees who wants to send a message to another branch can just use its domain
name, and does not have to know the IP addresses of the branch.
To configure CallPilot 100/150 to use IP addresses
1
Start CallPilot Manager.
2
Click the
Configuration
heading.
3
Click the
Unit Address/Identification
link.
The Unit Address and Identification page appears.
4
In the
Host name or IP Address
box enter your IP address.
5
Leave the
Primary DNS
and
Secondary DNS
boxes empty.
6
Click the
Submit
button.
7
You must reboot CallPilot for the new settings to take effect.
