42
Chapter 3 Setting up AMIS
N0008713 01
To send a test network message using the AMIS Loopback mailbox -
CallPilot
To determine if Network Messaging is working, open your mailbox. The message you record
returns as a message to your mailbox. If the message does not appear in your mailbox after five
minutes:
•
ensure that the Network Delivery option is enabled.
•
ensure that the Call Blocking periods at your site and at the receiving site allow Network
Messaging during the time you attempt to test the system. Call Blocking prevents calls being
sent during a specific time period.
•
consider whether the test message is delayed by the period of the Retry interval. The Retry
interval is a Class of Service feature. For more information on Class of Service, refer to the
CallPilot Manager Set Up and Operation Guide.
•
consider whether the test message is subject to line availability at your site or at the receiving
site.
1
Press
≤
·°⁄
.
Follow the voice prompts or the display button options to open
your mailbox.
2
Press
COMP
or
‡fi
.
3
Press
SPEC
or
⁄·
.
4
Enter the system phone number of the destination site
and press
OK
or
£
.
5
Press
OK
or
£
.
6
Enter the Loopback mailbox number and press
OK
or
£
.
7
Press
DONE
or
£
.
8
Press
REC
or
fi
.
9
Record your message and then press
OK
or
£
.
10
Press
SEND
or
‡·
.
11
Press
®
to end this programming session.
No messages
COMP MBOX EXIT
To:
NAME SPEC CNCL
Dest ph:
RETRY OK
<phone #>
ADD OK
Dest mb:
RETRY OK
To:
NAME SPEC DONE
Empty
REC
Recording...
REREC OK
Rec stopped
PLAY DEL SEND
