manualshive.com logo in svg

Nortel Call Recording, User Manual, Page: 94 / 94

Share
Download
Nortel Call Recording User Manual Download Page 94

Nortel Call Recording Card

Planning, Installation, and Administration Guide

Nortel Networks

Mervue Business Park

Galway, Ireland

Copyright © 2007 Nortel Networks, All Rights Reserved

Nortel Networks reserves the right to make changes in design or components as progress 
in engineering and manufacturing may warrant.

The process of transmitting data and call messaging between the Meridian 1 and Nortel Call 
Recording Card is proprietary to Nortel Networks. Any other use of the data and the 
transmission process is a violation of the user license unless specifically authorized in 
writing by Nortel Networks prior to such use. Violations of the license by alternative usage of 
any portion of this process or the related hardware constitutes grounds for an immediate 
termination of the license and Nortel Networks reserves the right to seek all allowable 
remedies for such breach.

Publication number:

297-2183-217

Product release:

6.01

Document release:

Standard 1.0

Date:

September 2007

Nortel, the Nortel logo and the Globemark are trademarks of Nortel Networks. 

All other trademarks are the property of their respective owner.

To provide feedback or report a problem with this document, go to 

www.nortel.com/documentfeedback

.

Summary of Contents for Call Recording































































































Reviews:

No comments