52
DC power supply installation
Replacing the 8010co chassis bottom bezel model 321325-A
Use the procedure in this section to replace the bottom front bezel for
model 321325-A.
Procedure steps
ATTENTION
The 8005DC power supplies require a modified air intake bezel. If you have
installed Model 8005DC power supplies (1500 W) in the 8010co chassis and
have air intake bezel imprinted with 312096-A, or if you have difficulty installing
the bezel over the 8005DC power supplies, you can order modified bezel model
321325-A (Order Code DS1411027).
Step
Action
1
Insert the three bottom bezel tabs behind the return flange on the
power module. See figure below.
2
Place the top of the bezel against the chassis.
3
Align the captive screws with the holes on the front of the
chassis.
Nortel Ethernet Routing Switch 8600
Installation — DC Power Supply
NN46205-307
02.02
19 December 2008
Copyright © 2008 Nortel Networks
.
Summary of Contents for 8004DC
Page 69: ......
