Removing the power filler panel
41
Procedure steps
Step
Action
1
Use a Phillips screwdriver to loosen the two captive screws that
secure the power filler panel to the chassis until the power filler
panel disengages.
See
“Job aid: Power filler panel removal” (page 41)
2
Pull the power filler panel from the chassis.
CAUTION
Save the power filler panel in case you need to
operate the Ethernet Routing Switch 8600 with a
power supply removed.
--End--
Job aid: Power filler panel removal
Figure 7
Removing a power filler panel: 8010co chassis
Nortel Ethernet Routing Switch 8600
Installation — DC Power Supply
NN46205-307
02.02
19 December 2008
Copyright © 2008 Nortel Networks
.
Summary of Contents for 8004DC
Page 69: ......
