Nortel 425 series Cli Manual Download Page 479

Page: 479 / 526

Supported MIBs

479

Table 89
Supported MIBs (cont’d.)

MIB

Description

ALTEON-ISD-SSL-MIB

Contains objects for monitoring the SSL gateways. The
following groups are implemented:

•

sslBasicGroup

•

sslEventGroup

ALTEON-SSL-VPN-MIB

The following group is implemented:

•

vpnBasicGroup

DISMAN-EVENT-MIB

The MIB module for defining event triggers and actions.
The following groups are implemented:

•

dismanEventResourceGroup

•

dismanEventTriggerGroup

•

dismanEventObjectsGroup

•

dismanEventEventGroup

•

dismanEventNotificationObjectGroup

ENTITY-MIB

The following groups are implemented:

•

entityPhysicalGroup

•

entityPhysical2Group

•

entityGeneralGroup

•

entityNotificationsGroup

Write access to snmpTargetParamsTable is turned off in
VACM.

IF-MIB

The following groups are implemented:

•

ifPacketGroup

•

ifStackGroup

Limitations

The agent does not implement the following objects:

•

ifType

•

ifSpeed

•

ifLastChange

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 479 / 526

Search results

Summary of Contents for 425 series

Reviews: