Nortel 425 series Cli Manual Download Page 375

Page: 375 / 526

Reinstalling the software

375

Reinstalling the software from a CD

To reinstall the software image from a CD, perform the following steps:

Step

Action

Boot the Nortel SNAS from the CD.

Log on as the root user (no password).

Run

install-nsnas isd4050

When the installation is complete, remove the CD and reboot.

--End--

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 375 / 526

Search results

Summary of Contents for 425 series

Reviews: