Nortel 425 series Cli Manual Download Page 250

Page: 250 / 526

250

Customizing the portal and user logon

/cfg/doamin #/portal/colors

followed by:

color4 <code>

Specifies the color fornon-active tabs.

•

code

is the hexadecimal value for the

color, including the # symbol (not case
sensitive)

The default value is #58B2C9.

theme default|aqua|apple|

jeans|cinnamon|candy

Specifies the color theme for the portal.
The default is

default

For more information about the portal colors and themes, see

“Colors”

(page 231)

Configuring custom content

To add custom content, such as Java applets, to the portal, use the
following command:

/cfg/doamin #/portal/content

The Portal Custom Content menu appears.

The Portal Custom Content menu includes the following options:

/cfg/doamin #/portal/content

followed by:

import <protocol> <server>

<filename>

Imports a content file (in ZIP format) from
the specified TFTP/FTP/SCP/SFTP file
exchange server.

•

protocol

is the import protocol.

Options are

tftp|ftp|scp|sftp

.The

default is

tftp

•

server

is the host name or IP address

of the server

•

filename

is the name of the content

file (.zip) on the server

The file is saved in the portal’s root
directory and is automatically unpacked.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 250 / 526

Search results

Summary of Contents for 425 series

Reviews: