Nortel 425 series Cli Manual Download Page 169

Page: 169 / 526

Configuring groups and extended profiles

169

Figure 9
Linksets menu commands

Creating a default group

To create a default group, first create a group with extended profiles
mapped to a restrictive VLAN (see

“Configuring groups” (page 156)

and

“Configuring extended profiles” (page 164)

). Then use the following

command to make this group the default group:

/cfg/doamin #/aaa/defgroup <group name>

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 169 / 526

Search results

Summary of Contents for 425 series

Reviews: