Nortel 425 series Cli Manual Download Page 231

Page: 231 / 526

Overview

231

Figure 14
Default appearance of the portal Home tab

Colors

There are four colors used on the portal page:

•

color1—the large background area below the tabs

•

color2—the background area behind the tab labels

•

color3—the fields, information area, and clean icons on the active tab

•

color4—not used

There are five optional color themes. The themes are predefined sets of
web-safe colors that complement each other.

•

aqua

•

apple

•

jeans

•

cinnamon

•

candy

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 231 / 526

Search results

Summary of Contents for 425 series

Reviews: