Nortel 425 series Cli Manual Download Page 294

Page: 294 / 526

294

Configuring system settings

The Auto Blacklisting menu appears.

The Auto Blacklisting menu includes the following options:

cfg/sys/adm/abl

followed by:

users <list> <add>

<del>

user names to be monitored.

•

list

—lists monitored users.

•

add

—adds a user to list, specify the unique

user name.

•

del

—deletes a user from lists, specify the

index number.

hosts <list> <add>

<del>

hosts(IPs) to be monitored.

•

list

—lists monitored hosts.

•

add

—adds a host to list, specify the IP

address.

•

del

—deletes a host from list, specify the index

number.

user_atmpt

Specifies allowed number of failed attempts to a
user account.
Default value is 10/1h attempts/time period.

host_atmpt

Specifies allowed number of failed login attempts
from a host.
Default value is 10/1h attempts/timeperiod.

user_purge

Specify time period for purging failed user attempt
record.
Default value is 2d.

host_purge

Specify time period for purging failed host attempt
record.
Default value is 2d.

show

Shows the details of failed login attempts of users
and hosts

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 294 / 526

Search results

Summary of Contents for 425 series

Reviews: