Nortel 425 series Cli Manual Download Page 207

Page: 207 / 526

Configuring authentication

207

You can add MAC addresses to the database in three ways:

•

using the

/cfg/doamin #/aaa/auth #/macdb/add

command

•

using the

/cfg/doamin #/aaa/auth #/macdb/import

command

to import a file that has been properly formatted

•

using the MAC Registration portal provided at login when a user

belongs to a group with

macreg

set to

True

(

/cfg/doamin

#/aaa/group #/macreg

)

To manage MAC addresses and associated parameters, use the following
command:

/cfg/doamin #/aaa/auth #/macdb

The MAC database menu appears.

The MAC database menu includes the following options:

Table 44
Managing the local MAC database

/cfg/doamin #/aaa/auth #/macdb

followed by:

add

Adds a MAC address to the local database. You are prompted for the
following information:

•

MAC address

—MAC address of the host

•

user name

—username of the host operator; optional

•

device type <PC> <phone> <passive>

—

: when the host is a computer

—

phone

: when the host is a supported IP telephone

—

passive

: when the device does not have an operator (for

examples: a printer, a video camera); it is recommended that
passive devices belong to their own, unique group

•

IP type <dhcp> <static>

—

dhcp

: when the IP address of the host is provided by a DHCP

server

—

static

: when the IP address of the host is static

•

switch IP address

—IP address of the network access device that

serves the host; optional; recommended when device type is passive

•

group name(s)

—The name(s) or ID number(s) of the NSNA group(s)

of which the host is a member; a list of available groups is provided; if
there is more than one group, separate with a colon

•

comments

—any ASCII string, up to 80 characters; optional

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 207 / 526

Search results

Summary of Contents for 425 series

Reviews: