160
Configuring groups and profiles
Table 24
Configuring groups (cont’d.)
/cfg/doamin #/aaa/group #
followed by:
enftype
<filter-only |
vlan-filter>
Establishes the enforcement type for NSNA
network access devices; that is, device that
support SSCP.
filter-only
indicates that Red, Yellow, and
Green enforcement zones are specified by filters
within the Red VLAN.
vlan-filter
indicates
that enforcement zones are specified by filters
applied to unique Red, Yellow, and Green VLANs.
For information on enforcement types, see
“Nortel
SNAS enforcement types” (page 28)
.
admrights
<user> <passwd>
<action> <reset>
Sets a username and password for raising the
privilege of the Nortel Health Agent applet to
administrator; applies to Windows operating
systems only.
When the
vlan-filter
enforcement type
applies, Nortel Health Agent requires administrator
privileges to the PC in order to change the IP
address of the PC. If the privileges Nortel Health
Agent inherits from the username/password of the
user do not provide administrator privileges, you
can use
admrights
to raise the Nortel Health
Agent privileges.
Enter an administrator username and password
for
user
and
password
, respectively; for
example, the network administrator username and
password.
The
user
field accepts usernames with the format
domain\username.
When the administrator username and password
setting are not configured the following actions
can be selected:
•
no_access
denies access to the network; this
is the default
•
filter_only
selects filter_only enforcement
(see
enftype
above).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.
Summary of Contents for 425 series
Page 525: ......