Nortel 425 series Cli Manual Download Page 361

Page: 361 / 526

Managing and maintaining the system

361

/cfg/scheduler/add

followed by:

output mode

Specify the output mode. Values: tftp,
and ftp.

tags

Specify the tag. 1 all, 2 aaa, 3 dhcp, 4
dns, 5 ssl, 6 nha, and 7 snas default is
all

domain

Specify the domain.

TFTP Server

Specify the TFTP server.

filename

Specify the filename.

/cfg/scheduler/add

followed by:

upgrades

day of week

Select the day of the week. You can select
the multiple days in a week.
The value ranges from 0 to 6. (Sunday = 0)
and [*]: 1-5

month(s)

Select the month. You can select the
multiple months.
The value ranges from 1 to 12 .

day(s)

Select the day of the month. You can
select the multiple days of a month.
The value ranges from 1 to 31.

hour(s)

Specify the hour.
The value ranges from 0 to 23.

minute(s)

Specify the minute.
The value ranges from 0 to 59.

comments

Specify comment for this scheduler

protocol

Select the Protocol (tftp/ftp).

hostname or IP address

Specify hostname or IP address of server.

filename

Specify the filename.

Managing Nortel SNAS devices

To manage Nortel SNAS software and devices, use the following
command:

/boot

The Boot menu appears.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Summary of Contents for 425 series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 425 series

Reviews:

Nortel 425 series, Cli Manual, Page: 361 / 526

Search results

Summary of Contents for 425 series

Reviews: