Nortel 2210 User Manual Download

Page: 12 / 134

New in this release

Table 1
221x handset controls

Control

Meaning

Soft keys

Soft keys provide access to all Centrex IP Client Manager (CICM)
menus and services. Two rocker switches (soft keys), located
immediately below the display area, provide the means to select
menu items and perform operations.

Power on/start call

Press to activate the handset and enter the active/on-hook state.

Power off/end call

Press to deactivate the handset and return to the idle (power save)
state.

Dialpad

A standard telephone push-button pad.

Transitions the handset from the idle state to the active state, or
from the active state to the idle state without going off-hook.

FCN

Function key that provides access to these feature keys:

Mute

Hold

Goodbye

Summary of Contents for 2210

























































































































Search results

Summary of Contents for 2210

Reviews:

Related manuals for 2210

Brands by name

Popular brands

Nortel 2210, User Manual

Search results

Summary of Contents for 2210

Reviews:

Related manuals for 2210

Brands by name

Popular brands