Nortel 2210 User Manual Download

Page: 96 / 134

Using the User Option menu

— Ring Volume

— Vibrate Cadence

— Ring Delay (see Note 2)

•

Message Alert 1 — reserved for future use.

•

Message Alert 2 — reserved for future use.

Note 1: Ring Tone does not appear in the menu when Ring Cadence is
off.

Note 2: Ring Delay does not appear in the menu when Ring Cadence or
Vibrate Cadence is off.

Select Ring Cadence

Procedure Steps

Step

Action

While the handset is in standby mode, select the Cfg soft key.

Use the Nav keys to scroll to User Profiles.

Press Enter to select User Profiles. The next menu level is
displayed.

Use the Nav keys to scroll through the menu and highlight one of
the settings. (an asterisk [*] indicates the selected/active setting).

Press Enter to select the option.

Use the Nav keys to scroll to Ring Settings.

Press Enter to select the option.

Use the Nav keys to select Telephone Ring.

Press Enter to select the option.

Use the Nav keys to scroll to Ring Cadence and select one of
the following:

•

Off

•

PBX (default)

•

Continuous

•

Short Pulse

•

Long Pulse

Press Enter to choose the cadence.

Carrier VoIP

Nortel IP Phone WLAN Handset User Guide (CICM)

NN10042-116

04.01

Standard

4 July 2008

Summary of Contents for 2210

























































































































Search results

Summary of Contents for 2210

Reviews:

Related manuals for 2210

Brands by name

Popular brands

Nortel 2210, User Manual

Search results

Summary of Contents for 2210

Reviews:

Related manuals for 2210

Brands by name

Popular brands