Nortel 2210 User Manual Download Page 99

Page: 99 / 134

Select Ring Options

Select Vibrate Cadence

Procedure Steps

Step

Action

While the handset is in standby mode, press the Cfg soft key.

Use the Nav keys to scroll to Use Profiles.

Press Enter to select the Use Profiles. The next menu level is
displayed.

Use the Nav keys to scroll through the menu and highlight one of
the settings (an asterisk [*] indicates the selected/active setting).

Press Enter to select the option.

Use the Nav keys to scroll to Vibrate Cadence.

Press Enter to select the option.

Use the Nav keys to highlight one of the following:

•

Off (default)

•

PBX

•

Continuous

•

Short Pulse

•

Long Pulse

Press Enter to choose the cadence.

Do one of the following:

•

to return to the previous menu and choose another option,
press Back, or

•

to exit all menus and return to the standby state, press the
End key.

--End--

Select Ring Delay

Procedure Steps

Step

Action

While the handset is in standby mode, press the Cfg soft key.

Attention:

Ring Delay does not appear in the menu when Ring

Cadence or Vibrate Cadence is turned off.

Carrier VoIP

Nortel IP Phone WLAN Handset User Guide (CICM)

NN10042-116

04.01

Standard

4 July 2008

Summary of Contents for 2210

























































































































Search results

Summary of Contents for 2210

Reviews:

Brands by name

Popular brands

Nortel 2210, User Manual

Search results

Summary of Contents for 2210

Reviews:

Brands by name

Popular brands