Nortel 2210 User Manual Download

Page: 54 / 134

Use the CICM Feature menu

Attention:

Enabling or disabling the CICM Inbox

Procedure Steps

Step

Action

From the Feature menu, select and open Inbox.

The Inbox screen appears.

Perform one of these actions:

•

To enable the Inbox, select Enable.

•

To disable the Inbox, select Disable.

Press Ok.

--End--

Labeling a feature key

Follow this procedure to change the label of a feature key.

If you are unsure how to use the dialpad to enter text, see

"Enter text using

the dialpad" (page 105)

before starting this procedure.

Prerequisites

You must first access the Feature menu. To access the menu, see

"Navigating the Feature menu" (page 51)

Procedure Steps

Step

Action

From the Feature menu, select and open Label.

The Label screen appears.

Press Clear to delete the label currently associated with the key.

Use the dialpad to enter the new label. Press Bksp to
backspace if you need to make a correction.

Press Ok to save the entry.

You return to the Feature menu.

--End--

Using the Options menus

Follow these procedures to access the Options menus: Auto Hide, Default
Feature, and Outbox.

Carrier VoIP

Nortel IP Phone WLAN Handset User Guide (CICM)

NN10042-116

04.01

Standard

4 July 2008

Summary of Contents for 2210

























































































































Search results

Summary of Contents for 2210

Reviews:

Related manuals for 2210

Brands by name

Popular brands

Nortel 2210, User Manual

Search results

Summary of Contents for 2210

Reviews:

Related manuals for 2210

Brands by name

Popular brands