Trunk Answer
Trunk Answer allows you to answer, from any telephone, an
external call which is ringing at another telephone in your office.
This is useful if the other telephones have not been assigned the
same lines as the telephone you are using to answer the call.
You can change the Trunk Answer setting only if the Service
Mode is set to Manual or Automatic.
Use the
display button to select the setting: Y (Yes) or
N (No).
Extra-Dial telephone
A telephone normally in service as a Direct-Dial telephone, can
be programmed in Service Modes to allow internal calls to the
Direct-Dial telephone to also ring at the Extra-Dial telephone.
Use the
display button and the dial pad to enter the
internal telephone number of the Extra-Dial telephone.
Programming hints
The Extra-dial telephone provides the option of assigning one
more Direct-Dial telephone in the
system for each
operational Service Mode.
Ringing
You can assign additional telephones to ring for incoming calls
on each external line. Use the
button, the
display button and the dial pad to, enter the internal telephone
number of the Ringing telephone for each line.
You can indicate whether the Auxiliary Ringer (if installed) also
rings. Use the
display button to select the setting:
Y (Yes) or N (No).
Programming hints
The default ringing telephone is
21.
This
means that all
lines ring
at Control telephone 21, when Service Modes are activated. A
Ringing telephone can be assigned to more than one Service
Mode.
Compact
System Coordinator Guide
Summary of Contents for Compact 616 DR5
