Norstar Compact 616 DR5, Installer'S Manual

Page: 15 / 287

1.
8 installing the telephones
Installing a wall-mounted telephone
2.
3.
4.
5.
Remove the beveled wall-mounting
base from the back of the telephone.
Grip the telephone, and with your
thumbs, push on the wide edge of the
base to pop it out from the telephone.
Remove the receiver clip from the
wall-mounting base. Install the clip in
the forward lip “of the receiver rest.
Use a screwdriver or similar tool to
remove the center knock-out panel in
the wall-mounting base.
Screw the base to the wall (thin end
up) so that the wall jack projects
through the knock-out.
Connect one end of the line cord to the
telephone line jack (indicated by the
symbol below).
6.
7.
Route the line cord through the
appropriate cord guide in the bottom of
the telephone.
Connect the other end of the line cord
to the wall jack. Store any spare cord
neatly in the base of the telephone and
mount the telephone on the base.
WARNING
If the telephone line is supported with auxiliary power,
the power source must be a Class 2 power source that
is UL and CSA Listed.
Compact Installer Guide