manualshive.com logo in svg

Norsonic NOR150, Instruction Manual

Share
Download
Norsonic NOR150 Instruction Manual Download Page 81

65

Norsonic Nor150

Instruction Manual

HINT! To jump between markers, push the marker 
button and use the left right arrow key to jump to the 
next marker.

NOTE! The number in brackets added in front of the 
soft keys in the Note menu is the number of notes 
added. This feature is available in Software version 
1.2 and above

HINT! Nor150 fitted with the enhanced environmental 
option (option 11) offers a neat solution for setting 
markers and adding comments to a measurement 
using a smartphone, pad or PC. These features are 
described in a separate manual.

selection list appears with the available comments files 
(Figure 15.2). Select one and push enter to replay. Only 
the comments before and after the measurement is 
listed. Comments recording during a measurements are 
replayed by placing the cursor on the comment marker 
indicated by green colour (Figure 15.3).

You may push the 

Marker

 button to enable the jump to 

next marker function.

Pictures, Voice and Audio recordings may be viewed / 
replayed via the note menu followed by the corresponding 
note button (

Playback

 or 

Listen 

button). This gives you a 

list of all the captured pictures, audio recordings or voice 
notes. However, this feature does not connect the notes 
to the applicable event marker. If this is needed,  push 
the marker button and then jump to the right marker using 
the left/right arrow key. Open the context sensitive menu 
and select 

view

 or 

play

 button. The latter method assigns 

the correct note to the marker. The notes may also be 
viewed in NorReview version 6 and above. 

Figure 15.1

Figure 15.2

Figure 15.3

Summary of Contents for NOR150

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands