Norsonic NOR150, Instruction Manual

Page: 35 / 216

19 Norsonic Nor150
Instruction Manual
Setting up the
analyser
The organisation of the display
After the Nor150 is turned on, the applications
selection screen appears (Figure 5.1). If you just pass
this screen or tap on the “last used” icon, the instrument
will show the same types of displays as when you left it
last time. If this is the first time you start your instrument,
some predefined views will be there for you.
If a specific set up is selected in the applications
selection screen, the associated functions and views
will also be loaded.
The display (Figure 5.2) is divided in three main sections.
On the top is a status bar holding information about the
current state and at the bottom is a row with quick access
keys. See
“The status bar”
and
“The soft key bar”
chapter
on the next pages for detailed explanation. The middle
part is either one full or two half displays that can be
customized to your needs. By holding your finger on a
graph (the white coloured area) for a couple of seconds,
a context sensitive menu will be displayed, alternatively
pushing the
√
button located between the arrow keys
on the keyboard.
The display settings will be saved in the instrument so
you can recall them back again next time you want to
use the instrument.
Figure 5.1