manualshive.com logo in svg

Norsonic NOR150, Instruction Manual

Share
Download
Norsonic NOR150 Instruction Manual Download Page 139

123

Norsonic Nor150

Instruction Manual

Figure 21.49 - Warning 
panel shows warnings for 
the cursor position. Press 
the action text to show an 
explanation text.

Figure 21.50 -  
Recommended action for 
a frequency band.

Saving and loading intensity projects

The Nor150 in intensity mode automatically saves 
a project using the current date and time when a 
measurement is started. However, to assign a name to 
the project, press the 

MEM

 button.

Loading a measurement is also done simply by pressing 

MEM

. Select measurements from the list. For details 

about folders, SD card storage etc, please refer to

 

“Storing a measurement - Memory Organising Menu” 
on page 68

.

Exporting projects is done in the same way for intensity 
projects as for normal measurements, using the 
NorConnect software. Please see 

“Norsonic software” 

on page 155

Helpful features

The note functions available in environmental view is also 
available in intensity view. The details of the functions are 
discussed on 

“Voice and Text notes” on page 64

.

In general, notes, voice recordings and pictures 
belong to the scope level. If inside the surface scope, 
the applied notes will belong to this scope. Thus, it 
is possible to find notes corresponding the complete 
measurement, a surface or a segment later, either on 
the instrument or in post-processing software.

Using the smartphone

The smartphone with NorVirtual App provides exactly 
the same features as the instrument by presenting the 
same picture. See  

“Norsonic software” on page 155

 

HINT: The smartphone may be used to take pictures 
of the measurement surfaces. These will show up 
as a background on the smartphone surface view, 
and in the post-processing software Nor850.

Sound power using ISO 9614-2

The ISO 9614-2 is a standard for determining sound 
power based on sound intensity. The method relies 
on the scanning method, and is available for both 
engineering and survey grade accuracy.

The following sections will discuss the setup, measurement 
and review of sound power measurements according to 
ISO 9614-2.

Summary of Contents for NOR150

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands