Norsonic NOR150, Instruction Manual

Page: 42 / 216

26 Chapter 5
Setting up the analyser
Input
Your transducers, microphones and
preamplifiers are specified and
connected to the analyser in the
Input menu.
Measurement
All basic measurement parameters
are set here, such as measurement
parameters, time profile resolution,
overall measurement time, Time
constants, Filter frequency response
and resolution etc.
Trigger The trigger menu defines how to
start a measurement and how to
setup the event triggers.
Marker
Defines what the individual markers
represent and how they are
displayed in the graphical displays.
Views Defines the graphical and numerical
views consisting of four individual
views that may contain almost any
combination of display types and
measured functions.
Signal
Generator The signal generator (optional)
provides test signals that match
your measurement needs.
Memory Setup and configuration of the
memory. Define file naming, path
etc. Results can be organized in
folders and projects.
Instrument This menu contains instrument
specific settings like date and time,
language, number formats, power
saving setting, interface setting etc.
Applications Access the factory predefined
applications and user defined
settings.
On/Off/Available/Disabled indication
In most menus there are indications whether something
is selected or not (Figure 5.6). The green tick means
that the function is selected and the red X means that
it is not.
A greyish menu indicates that this function is not available
(Figure 5.7). Either due to the state the instrument is in,
or that an option is not enabled.
A menu selection containing a submenu is indicated
with an (Figure 5.8).
Figure 5.6 Figure 5.7
Figure 5.8