Operation
4-4
Part 107016-02
E
2016 Nordson Corporation
Daily
(contd)
5. See Figure 4-2. If your spray gun has a diffuser, remove the diffuser
hose connector (1) from the bracket (2). Disconnect the air tubing from
the tubing connectors (3). Clean the bracket and the connector with
low-pressure compressed air and a clean soft cloth.
NOTE:
If necessary, use a cloth dampened with isopropyl or ethyl alcohol
to clean the powder path parts. Remove the O-rings first. Do not immerse
the spray gun in alcohol. Do not use any other solvents.
1400413B
1
2
3
Figure 4-2
Removing the Diffuser Hose Connector for Cleaning
1. Hose connector
2. Diffuser bracket
3. Tubing connectors
6. Inspect the powder path parts for wear. Replace worn parts.
7. Assemble the spray gun. See Figure 4-1. Rotate items 4, 6, and 8 at
least 30
_
from their previous position to prevent uneven wear and
lopsided patterns.
Weekly
Check the resistance of the multiplier/resistor probe assembly with a
megohmmeter, as described in the troubleshooting procedures. Replace
the multiplier, resistor, or both, if the resistance readings do not fall within
the specified ranges.
Refer to
Continuity and Resistance Checks
in the
Troubleshooting
section
for more information.
Summary of Contents for Versa-Spray II
